Features
●4 digits and 7 Segment of torque display
●16 x 2 LCM display settings
●Password and key control to avoid operator adjusting settings.
●Counting preference set up (count up and count down)
●Slow start time 0.0-9.9 sec
●Slow start speed (10%~90%,L1~L9)
●Workpiece in place sensor (on/off)
●Set up fastening thread range
●I/O signal (mos-relay)
●RS-232 interface for data output, storage and use with barcode scanner
●99 data storage
●Set up fastening time range
●Set up fastening torque range
●Error code
●Auto learning
●Change torque unit
●Offset setting
●External start
●External reverse
●External disable tool
●External confirm
| Specification | Details |
|---|---|
| Model | KL-CTDS |
| Input Voltage | DC32V/40V |
| I/O Output Voltage | DC24V50mA/12V100mA |
| Count | 1-250 |
| Count Method | Count-up / Count-down |
| Slow Start Setting Time | 0~9.9 seconds |
| Slow Start Speed Setting | L0:100%, 10%~90% L1~L9 Rated speed |
| Detection Stop Time | 0.00~9.99 seconds |
| Detection Torque Value | 0.00-550.00 kgf.cm |
| Detection Screw Thread Number | 0.0~999.9 |
| External Connection Input | Start / Reverse / Disable / Confirm / Cleared / Gate / Sequence Cleared |
| External Connection Output | OK / NG / OKALL / STOP |
| Serial Interface | RS-232X2 |
| Assembly Management | KL-DAS / KL-AMS |
| External Dimensions | 155 x 120 x 60 (mm) |
| Weight | 630g |
| Accessories | Power Cable x1, Key x2 |
| Applicable Models |
SKD-BNK200 series, SKD-BNK500 series, SKD-BNK800 series, SKD-BNK900 series, SKD-RBNK series, SKD-TBNK series, SKD-LRBNK series |
| Model | Torque (kgf.cm) | Torque (Lbf.in) | Torque (N.m) | Repeatable Torque Accuracy (%) | Free Speed (r.p.m) HI | Free Speed (r.p.m) LO | Screw Size Dia (mm) Machine Screw | Screw Size Dia (mm) Tapping Screw | Weight (g) | Length (mm) | Power Controller | Bit Type |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SKD-BNK203L | 0.2~3.5 | 0.18~3.08 | 0.02~0.34 | ±3% | 1000 | 700 | 1.0~2.3 | 1.0~2.0 | 330 | 185 | SKP-BE32HL | B, C |
| SKD-BNK203 LS5 | 0.2~3.5 | 0.18~3.08 | 0.02~0.34 | ±3% | 500 | 350 | 1.0~2.3 | 1.0~2.0 | 330 | 185 | SKP-BE32HL | B, C |
| SKD-BNK203 LS6 | 0.2~3.5 | 0.18~3.08 | 0.02~0.34 | ±3% | 370 | 260 | 1.0~2.3 | 1.0~2.0 | 330 | 185 | SKP-BE32HL | B, C |
| SKD-BNK203LS7 | 0.2~3.5 | 0.18~3.08 | 0.02~0.34 | ±3% | 230 | 160 | 1.0~2.3 | 1.0~2.0 | 330 | 185 | SKP-BE32HL | B, C |
| SKD-BNK207L | 0.5~7 | 0.44~6.16 | 0.05~0.69 | ±3% | 1000 | 700 | 1.4~2.6 | 1.4~2.3 | 330 | 185 | SKP-BE32HL | B, C |
| SKD-BNK210L | 1~10 | 0.88~8.8 | 0.10~0.98 | ±3% | 1000 | 700 | 1.6~3.0 | 1.6~2.6 | 330 | 185 | SKP-BE32HL | B, C |
| SKD-BNK210P | 2~10 | 1.76~8.8 | 0.2~0.98 | ±3% | 1000 | 700 | 1.6~3.0 | 1.6~2.6 | 310 | 230 | SKP-BE32HL | B, C |
