acewell
High Quality and Performance Handheld Nutrunner
Sanyo Machine Works has pioneered advanced technology as the first manufacturer to sell nutrunners in Japan. These handheld nutrunners "SHDN", built on decades of experience, deliver both fastening quality and work efficiency through high fastening accuracy and low reaction technology.
They are certain to contribute to improved fastening quality and productivity in any operation.
Compact, Ultra-Light Weight & High Power
- Small & Ultra-Light Tool: Only 0.95 kg (16 Nยทm pistol type) with compact motors & resins.
- Low Operation Temperature: Motor design keeps tool cool even in continuous duty.
- Thin & High-Flex Cable: Reduces strain and operator fatigue.
- Compact Controller: Space-saving, installs line-side or on a cart.
High Performance, High Durability & High Reliability
- Top-Level High-Speed Tool: New high-speed pistol tool (SHD-T2 Type) achieves speeds 3x faster with improved brake performance, reducing fastening time.
- Super Durability: Proven by 1 million consecutive running tests at rated torque. Planetary gear design improves durability and lowers noise.
- Non-Contact Trigger Switch: Non-wear, long-lasting trigger with two-speed control for precise engagement.
- LED Indicator: OK/NG status confirmed by bright 3-color LEDs, customizable for error/fault codes.
- Resolver for Angle Detection: Measures rotation angle with high reliability and shock resistance.
- Quick & Easy Tool Change: Pre-calibrated tools ready for production with simple hook-up.
High Precision & Multi-Function
- High Accuracy & Quick Response: Quick response motor achieves seating torque at max speeds with minimal over-run, ensuring precise fastening and reduced cycle times.
- Programmable & Multi-Functions: Fully programmable fastening motions & sequences. Adjust tightening speed, acceleration ratio, or program dual fastening operations.
- Wide Communication Capability: Fastening data via RS232C. Optional communication with DeviceNet, Profibus, CC-Link, and Ethernet (TCP/IP).
- 64 Fastening Programs: Supports 64 customizable programs for torque, speed, and acceleration โ handling up to 64 different fastening applications.
Impact Mode
๏ผNutrunner mode๏ผ In Nutrunner mode, the tool continuously increases torque until the target torque is achieved. ๏ผImpact mode๏ผ In "Impact" mode, the tool controls motor speed and impact frequency. The tool motor starts and stops to create an impact effect which reduces torque reaction. It also helps to reduce operator strain and repetitive motion injuries. (Patented in Japan) Use Impact Mode fastening for all types of joint conditions by simply adjusting speeds and impact frequency.
Auto Adjusted Impact Mode Fastening
The SHDN series tool offers an Impact mode setting that automatically adjusts pulse speed and frequency to create repeatable torque accuracy with minimum reaction. This auto Impact mode is perfect for changing joint conditions on the same work piece (ex. soft joint / hard joint).
Pistol Tool
*1 The length depends on the output axis. (The upper table shows the size of the square type.)
*2 Square 9.52 or hex female 6.35
*3 Square 9.52 or square 12.7. In case of over 45Nยทm, it is recommended to use square12.7 type.
| Type | Model | Size (mm) | Output Axis (mm) |
|---|---|---|---|
| High-Speed Pistol | SHD-T2-010P | D: 43, H: 198, L: 242.5 | Square 9.52 |
| High-Speed Pistol | SHD-T2-012P | D: 43, H: 198, L: 242.5 | Square 9.52 |
| High-Speed Pistol | SHD-T2-020P | D: 43, H: 198, L: 269 | Square 9.52 |
| High-Speed Impact Pistol | SHD-T2-016P | D: 43, H: 198, L: 213 | Square 9.52 |
| High-Speed Impact Pistol | SHD-T2-032P | D: 49, H: 202.5, L: 229.5 | Square 9.52 |
| Pistol | SHD-T1-012P | D: 40, H: 194, L: 226 | Square 9.52 |
| Pistol | SHD-T1-020P | D: 40, H: 194, L: 230 | Square 9.52 |
Angle Tool
| Type | Model | D1 (mm) | D2 (mm) | H (mm) | L (mm) | Output Axis (mm) |
|---|---|---|---|---|---|---|
| Angle Tool | SHD-T1-020A | 30 | 43 | 48 | 434 | Square 9.52 |
| Angle Tool | SHD-T2-050A | 36 | 45 | 52 | 477 | Square 9.52 |
| Angle Tool | SHD-T2-100A | 46 | 54 | 65.5 | 498 | Square 12.7 |
| Angle Tool | SHD-T2-150A | 54 | 56 | 75 | 505 | Square 15.88 |
| Angle Tool | SHD-T2-220A | 63 | 56 | 87 | 792 | Square 19.05 |
Straight Tool
| Type | Model | Size (mm) | Output Axis (mm) |
|---|---|---|---|
| Straight Tool | SHD-T1-005S | D1: 31, D2: 43, L: 390 | Square 9.52 |
| Straight Tool | SHD-T2-030S | D1: 36, D2: 45, L: 446 | Square 12.7 |
| Straight Tool | SHD-T2-085S | D1: 44, D2: 56, L: 456 | Square 12.7 |
| Straight Tool | SHD-T2-150S | D1: 64, D2: 73, L: 489.5 | Square 15.88 |