ROTATE TORQUE TESTER NTS-6 SERIES
NTS-6 series (s1/s2/s5/s10/s20)
Rotate Torque Tester
Measurement of rotation starting torque and rotating load torque
Measure rotational torque of finished parts during assembly of equipment with rotating function.
As the output shaft self-rotates, catch load fluctuation of the rotating body by built-in sensor.
It can be measured rotational start torque of the rotated body (not rotating itself, no power) and load torque during rotation.
(Printer, copy machine, zooming lens, door knob mechanism, hinge mechanism etc …)
As the output shaft self-rotates, catch load fluctuation of the rotating body by built-in sensor.
It can be measured rotational start torque of the rotated body (not rotating itself, no power) and load torque during rotation.
(Printer, copy machine, zooming lens, door knob mechanism, hinge mechanism etc …)
| Form | NTS-06 | ||||
|---|---|---|---|---|---|
| S-1 | S-2 | S-5 | S-10 | S-20 | |
| Measuring range (at the time of TRUCK mode) | 3.0~100mN·m | 3.0~200mN·m | 0.030~0.5 N·m | 0.030~1 N·m | 0.030~2 N·m |
| Accuracy | ±1 % 30 mN·m or Less ±3digit | 0.3 N·m or Less ±3digit | |||
| Rotational frequency (at the time of no-load) | 85rpm | 25rpm | 13rpm | 18rpm | 18rpm |
| Display | The 4 figures digital display of LCD | ||||
| Measurement direction | CW-CCW Possible (right and left) It rotates by the motor. | ||||
| Measurement mode |
Peak operation mode (PF): Display the maximum under measurement. Truck mode (GO): Always display the load torque which has started. RG mode (PD): Carry out the data output of the load torque every 1/87 seconds. | ||||
| Measurement start time | Time after beginning rotation until it starts measurement is set up (0.0 - 1 second). | ||||
| Torque judging |
It is in measuring range and a setup of a maximum value and a minimum value is possible. [ O.K. In the Set point | Lamp lighting : ○ | NG Outside the Set point | Error buzzer ] | ||||
| External input and output |
Signal output (open collector): O.K., NG Data output: ASCII format (baud rate 19200), External start switch input | ||||
| Data output | ASCII format (baud rate 9600) | ||||
| Power supply | AC100V～240V | ||||
| Detection size | ⌀4 | HEX6.35 | |||
| Outside size | 166(W)×142(D)×48(H) | ||||
| Indicator size Detector | ⌀28×149 | ⌀37×191 | ⌀40×235 | ||
| Attachment | bits Inspection report, Proofreading certificate, Traceability system figure | ||||
